Oven Lamp Switch; Led Indicators; Automatic Re-Ignition; Operation During A Power Outage - Thermador PRL304EG Service Manual

Service Manual for Thermador Pro Grand LP Gas Ranges, Models: PRL304EG, PRL364EDG, PRL364ELG, PRL366EG, PRL484ECG, PRL486EDG, PRL486EDPG, PRL484ELG
2.1.8

Oven Lamp Switch

There is an oven lamp switch for each oven.
Figure 9: Oven Light Switch

2.2 LED Indicators

The LED indicators illuminate per current cycle. They are also used to
indicate fault codes (see Fault Codes, page 19).
Figure 10: LED Indicators

2.3 Automatic Re-Ignition

Each burner has its own electronic igniter that sparks when the burner
is turned on. If one or more burner blows out, the respective
igniter/electrode automatically re-ignites the flame.

2.4 Operation During a Power Outage

When there is a removal of electrical power, the XLO burners, griddle,
and grill cannot be used. Do not attempt to light them manually during
a power outage.
m
Caution
Power Outage Precautions
■ Ventilate well by opening a door or window, and wait at least five
minutes until all the gas dissipates.
■ If you smell gas, comply with the warnings and precautions in the
Important Safety Information section (page 6) of this manual.
58300000156573_ARA_EN_B

2.5 Maintop Components and Burner Assembly

Figure 11: Maintop Components and Burner Assembly
1 Burner cap
2 Venturi tube
3 Burner base (brass)
4 Trim for spill tray
5 Spill tray
6 Nut
7 Heat shield
8 Burner support rail
9 Wire guard clip
10 Jet holder assembly
11 Spring
12 Igniter plug (electrode)
Page 11 of 119