Thermador PRL304EG Service Manual page 95

Service Manual for Thermador Pro Grand LP Gas Ranges, Models: PRL304EG, PRL364EDG, PRL364ELG, PRL366EG, PRL484ECG, PRL486EDG, PRL486EDPG, PRL484ELG
Figure 187: Removing Gas Tubes from Bi-Metal Gas Valve
1 Compression nut on gas tube at inlet
2 Compression nut on gas tube at outlet
Figure 188: Bracket at Broil Burner Receptacle
1 Bracket at broil burner receptacle
58300000156573_ARA_EN_B
Figure 189: Bracket at Broil Burner Receptacle
4. From inside of the range, use a 9 mm open end wrench to remove
and retain the two nuts with lock washers that secure the HSI
retaining bracket onto the broil burner studs (see Figure 185 on
page 95, and Figure 190), and then remove the HSI retaining
bracket.
NOTE: If you have not removed the HSI, you'll now remove the
HSI retaining bracket with the HSI attached to it.
Figure 190: Broil Burner Screws and Studs (Rear of Burner Shown)
1 Studs (2) fastening HSI retaining bracket to broil burner
2 Rear screw fastening broil burner to top of oven cavity
Page 96 of 119