Grill Orifice And Elbow Connector Removal And Replacement - Thermador PRL304EG Service Manual

Service Manual for Thermador Pro Grand LP Gas Ranges, Models: PRL304EG, PRL364EDG, PRL364ELG, PRL366EG, PRL484ECG, PRL486EDG, PRL486EDPG, PRL484ELG
4.4.6 Grill Orifice and Elbow Connector Removal and
Replacement
16. From inside the burner box, remove and retain the two screws
securing the burner support (which houses the orifice and elbow
connector) onto the front of the burner box (see Figure 66 and
Figure 67), and then remove the burner support (see Figure 68).
Figure 66: Screws for Connecting Piece
1 Screw locations (2) securing the burner support onto
the burner box
Figure 67: Burner Support
1 Portal for orifice
2 Screw holes (2)
58300000156573_ARA_EN_B
Figure 68: Burner Support Removed with Orifice and Elbow
Connector Attached
1 Elbow connector (shown attached to gas flex line)
2 Burner support
3 Screw hole – for screw from grill burner tab
4 Screw holes (2) – for screws from burner box
5 Orifice
6 Holes on for burner support screws (2)
Figure 69: Elbow Connector
Figure 70: Typical Orifice
Page 37 of 119