Thermador PRL304EG Service Manual page 26

Service Manual for Thermador Pro Grand LP Gas Ranges, Models: PRL304EG, PRL364EDG, PRL364ELG, PRL366EG, PRL484ECG, PRL486EDG, PRL486EDPG, PRL484ELG
5. For both right-side and left-side brackets (see Figure 40), remove
and retain the following two screws:
■ The screw securing the element flange onto the bracket
(see Figure 41)
■ The screw securing the bracket onto the back frame
(see Figure 42)
6. Remove right and left brackets by lifting the pins out of the slots
on the element tray (see Figure 40).
NOTE: Depending on the model and FD number, some ranges
will not use the bracket shown in Figure 40, page 27).
Figure 40: Bracket
1 Screw location (attaches to back frame)
2 Screw location (attaches to element flange)
3 Pins (2)
58300000156573_ARA_EN_B
Figure 41: Removing Element Flange from Bracket
1 Location of screw on element flange that secures
the element flange to the bracket
Figure 42: Removing Bracket from Back Frame
1 Screw holding bracket onto the back frame
Page 27 of 119