Thermador PRL304EG Service Manual page 21

Service Manual for Thermador Pro Grand LP Gas Ranges, Models: PRL304EG, PRL364EDG, PRL364ELG, PRL366EG, PRL484ECG, PRL486EDG, PRL486EDPG, PRL484ELG
6. Slowly lift to remove the burner base (see Figure 26).
m
Caution
Fragile Component
The igniter plug is a ceramic component that can be brittle and crack
easily.
7. While lifting the brass burner base, carefully depress the locking
tab on the female terminal of the igniter wire, and gently pull to
detach from the igniter plug (see Figure 27 and Figure 28).
Figure 27: Igniter Wire Locking Tab
1 Tab (press it to detach wire from electrode)
8. [Only if the ignition plug needs replacing]: Remove and retain the
spring from the ignition plug by rotating the ignition plug clockwise
while simultaneously holding the spring with a flat blade
screwdriver to prevent its rotation (so that the spring is unscrewed
from the plug). You may need to push the spring upward with the
screwdriver in order to remove it from the ignition plug (Figure 29).
58300000156573_ARA_EN_B
Figure 28: Ignition Plug with Spring
Figure 29: Rotating the Ignition Plug to Detach Spring
9. [Only if the ignition plug needs replacing]: After the spring is
detached, remove the igniter plug from the burner base.
Page 22 of 119