Grill Components - Removal And Replacement - Thermador PRL304EG Service Manual

Service Manual for Thermador Pro Grand LP Gas Ranges, Models: PRL304EG, PRL364EDG, PRL364ELG, PRL366EG, PRL484ECG, PRL486EDG, PRL486EDPG, PRL484ELG
10. While removing the insulation (see Figure 53), be careful not to
pull on the thermostat bulb.
Figure 53: Removing the Insulation
11. Remove the insulation support bracket by pulling its two prongs
out of the slots in the retaining plate (see Figure 54).
Figure 54: Insulation Support Bracket
58300000156573_ARA_EN_B
4.4 Grill Components – Removal and Replacement
When diagnosing problems with the grill, also see Hot Surface Igniter
Board Removal and Replacement, page 62.
For adjustment of the grill burner flame, see Adjusting Bake Burner
Flame with the Air Shutter, page 14.
Be sure to check QuickFinder for relevant information, documentation,
and the correct part number when replacing any of these components.
Grill Hazards
■ The grill plate must be correctly in place whenever the grill is on
■ Do not service the grill when it is hot
1. Follow all safety precautions and steps in Preparing the Range for
Servicing, page 21.
2. Complete steps for Accessing Components under the Maintop,
page 21.
3. Remove the grill plate and grease tray (see Figure 55).
Figure 55: Grill Plate and Grease Tray
1 Grill plate
2 Grease tray
Page 32 of 119