Air Interlock Switch Removal And Replacement - Thermador PRL304EG Service Manual

Service Manual for Thermador Pro Grand LP Gas Ranges, Models: PRL304EG, PRL364EDG, PRL364ELG, PRL366EG, PRL484ECG, PRL486EDG, PRL486EDPG, PRL484ELG
4.6.7.1

Air Interlock Switch Removal and Replacement

The air interlock switch can be removed and replaced independently
of the cooling fan.
Be sure to check QuickFinder for relevant information, documentation,
and the correct part number when replacing this component.
Figure 154: Air Interlock Switch
Figure 155: Bracket
1. Follow all safety precautions and steps in Preparing the Range for
Servicing, page 21.
2. Remove the backguard, per Backguard and Island Trim Removal
and Replacement procedure, page 73.
3. Remove back panel, per Back Panel Removal and Replacement
procedure, page 74.
4. At the cooling fan, remove and retain the nuts securing the air
interlock switch onto its bracket (see Figure 154, Figure 155, and
Figure 156).
5. Replace the air interlock switch if needed.
58300000156573_ARA_EN_B
Figure 156: Air Interlock Switch on Cooling Fan
1 Bracket
2 Air interlock switch
Page 79 of 119