Reassembly Of The Air Cleaner Elements; Hydrostatic Steering Oil Tank - Zetor FORTERRA HSX 100 2014 Operator's Manual

REASSEMBLY OF THE AIR CLEANER
ELEMENTS
When reassembling the air cleaner ele-
ments proceed in the reverse order.
Observe the following points during the
element reassembly:
- Make sure the contact surfaces are
clean.
- During the assembly the elements must
not get deformed and after installation
they must not vibrate.
- After closing of the cleaner with the lid
the whole cleaner must be perfectly
leak-proof.
- After the maintenance of the dry air
cleaner ensure proper functioning of the
clogging indicator again.
MAINTENANCE INSTRUCTIONS
G715

HYDROSTATIC STEERING OIL TANK

The tank is accessible after opening the
hood. It is found in the front part on the
left side of the tractor.
By dipstick check (A) the height of oil
level in hydrostatic steering tank, keep
the level of oil between MIN. and MAX.
marks, see fig. (A).
If necessary, replenish the oil after nut
disassembly (1) and removing the lid of
tank.
200
W3