Quick Sinking; Transport Of Implements; Stop Position - Zetor FORTERRA HSX 100 2014 Operator's Manual

QUICK SINKING

Lever (1) in position (d) - free position.
You must hold the lever in this position;
after releasing the lever will return to po-
sition (c) - the system works in accord-
ance with the setting of controls (3), (4),
(5) and (6).
ELECTRO-HYDRAULIC SYSTEM
F_02_165

TRANSPORT OF IMPLEMENTS

Shift the lifting lever (1) to position "a"
and block it with the moving latch (2).
Blocking the lifting lever (1) by the mov-
ing latch (2) in position (a):
A - Lever movement blocked
B - Lever movement not blocked
When the tractor with an attached
implement is stopped, the imple-
ment must be lowered onto the
ground (it must not be left in the
lifted position).
F_02_166

STOP POSITION

By moving the lever (1) to position (b) -
STOP position - you will immediately
stop the movement of the three-point
hitch.
134
F_02_167