Dry Air Cleaner Maintenance Instructions; Recovery Of The Mainair Cleaner Element; Replacing The Safety Element Of The Air Cleaner; Reassembly Of The Air Cleaner Elements - Zetor CRYSTAL Series Operator's Manual

Dry air cleaner maintenance instructions

Perform maintenance of the air cleaner in the following
way:
1. Remove the right side plate of the hood
2. Release the clamps of the air cleaner lid (marked with
arrows)
3. Remove the air cleaner lid (1)

Recovery of the mainair cleaner element

Remove the main element of the dry cleaner (2) by
pulling.
If the main element is not damaged (there must not be any
dust on the inner side of the element), recover it by
blowing pressurized air from the inner side of the element.
This way you can recover the main element 3 times at the
most. The element must be replaced once a year.

Replacing the safety element of the air cleaner

Remove the safety element of the dry cleaner (3) by
pulling.
The safety element cannot be recovered. It
must always be replaced in these cases.
- If the main element is damaged.
- After covering 2000 hours of work
- At least once every two years.

Reassembly of the air cleaner elements

Carry out a reverse procedure in order to mount air filter
cartridges back on.
While mounting the cartridges back on mind:
- The cleanness of contact surfaces
- That the cartridges must not lose their shape while being
mounted and they must not vibrate after their mounting
has been finished
- That after having closed the filter with the cover you must
ensure a perfect tightness of the entire filter
MAINTENANCE INSTRUCTIONS
152
C15N086
NM14D015
NM14D016
C15N087