Bleeding The Fuel System - Zetor FORTERRA HSX 100 2014 Operator's Manual

BLEEDING THE FUEL SYSTEM

Before bleeding place a suitable
container under the engine to col-
lect dripping fuel from the filter
and injection pump.
MAINTENANCE INSTRUCTIONS
F_02_93a
1. Prime the fuel system with several strokes of the manual control of the priming
pump (1).
2. Release the screw (2) of the fitting of the fuel inlet to the filter and let the foam es-
cape.
3. Retighten the screw and repeat the procedure until after releasing of the screw
clear fuel starts to continuously flow from the filter.
4. Bleed the injection pump in the same way.
5. Do the bleeding with the screw (3) positioned on the pump body.
E706
198
E707