Possible Adjustable Tracks Of The Front Wheels Of The Front Driving Axle Of The Tractors - Zetor FORTERRA HSX 100 2014 Operator's Manual

POSSIBLE ADJUSTABLE TRACKS OF THE FRONT WHEELS OF THE FRONT
DRIVING AXLE OF THE TRACTORS
Used tyres
12.4-24 13.6R24
12.4R24 380/70R24
320/85R24 340/85R24
Front wheel tracks in mm
1630 -
1685 1770
1780 1695
1840 1920
1930 1850
1985 2070
2080 1955
WHEEL TRACK CHANGE
12.4-28 14.9-24
14.9R24
420/70R24
380/85R24
- -
1770
1770 -
1850 1920
1920 1850
1955 2070
2070 1955
Note: Use of different tyre dimensions
with individual tractor types - see chapter
Main technical parameters.
Tighten the front wheel nuts with the
torque of 250 - 290 Nm.
Rim position Tighten the nuts connecting the wheel
bead with the wheel disc with the torque
of 200 - 220 Nm.
You can change the wheel track by ch-
anging the position of the rim and disc.
 Loosen
 Change the track by setting the rim in
 Re-install the screws with washers and
 After
 After driving 100 m with the tractor
 After loading the tractor re-tighten the
 After 10 hours of work check the
152
First, secure the tractor against
moving, lift the axle with a lifting
jack and support it.
the nuts of
connecting the disc with the rim and
remove the screws.
the required position.
secure them with nuts. Tighten the
nuts with the torque of 230 - 250 Nm.
every loosening
connection tighten the screws to the
prescribed value.
without load re-tighten the connections
with the prescribed torque.
connections after 3 hours of work.
tightening of the nuts of discs and
wheel rims again.
the screws
of a bead