Change The Direction Of Drive; Change The Direction Of Drive By Means Of Reversing Lever - Zetor FORTERRA HSX 100 2014 Operator's Manual

CHANGE THE DIRECTION OF DRIVE

CHANGE THE DIRECTION OF DRIVE BY MEANS OF REVERSING LEVER

Change the direction of drive by means of reversing lever is done with travel speed lower than 10km/h. When you
attempt to change the direction of drive in speed higher than 10 km/hour, acoustic signal starts (uninterrupted
tone) and the tractor engages neutral. The signal switches off after the shift of reversing lever back to N position,
when depressing the clutch pedal or pressing the button of switching clutch on the head of gear shifting lever. It
is also necessary to lower the travel speed of tractor under 10km/, shift the reversing lever to neutral position and
to repeat the shifting of requested direction.
Keeping the following instructions when changing the direction of the drive, contributes to prolonging service life of
travel clutches.
 For changing the direction of the drive of tractor use reversing lever under the steering wheel without using the clutch pedal.
 For changing the direction of the drive of tractor, select the slowliest gear L with torque multiplier.
 For changing the direction of the drive of tractor, select lower gear with regard for the subsequent dead start and tractor load.
Changing the direction of drive by means of reversing lever is done at tractor travel speed lower than 10km/h. When you
try to change the direction of drive at the speed of more than 10 km/h, an acoustic signal starts (uninterrupted tone), the
signal switches off after the shift of the lever back to N position, when depressing the clutch pedal or pressing the button
for switching off the clutch on the head of the gear shifting lever.
1. Lower the travel speed of tractor under 10km/h by means of brake pedal.
2. Shift the reversing lever to the requested direction of tractor drive
3. The tractor stops automatically and travels in the requested direction
4. Continue in smooth dead start of the tractor with simultaneous incresae of engine revolutions
Should the tractor speed drop below 10km/h, tractor shift neutral and it is necessary to lower the travel speed of tractor
under 10km/h, shift the reversing lever to neutral position and to repeat the shifting to the required direction.
When depressing the clutch pedal, the automatic function is put off operation.
If the above mentioned is done subsequently after the attempt to change the direction of drive above 10 km/h, it is neces-
sary to lower the travelling speed of tractor below this speed. In opposite case, after the release of clutch pedal the neutral
remains shifted.
DRIVING OPERATION
74