Dead Start Of The Tractor; Dead Start Of Tractor In Regular Operation - Automatic Dead Start Function; Dead Start By Means Of Automatic Dead Start Function - Zetor FORTERRA HSX 100 2014 Operator's Manual

DEAD START OF THE TRACTOR

If at dead start, engine revolutions are higher than 1400 rpm L gear of multiplier is automatically shifted, not depending on the
switch of multiplier pre-selection on dashboard being on or off.
If the multiplier pre-selection switch on the dashboard is on at dead start, L gear of multiplier is shifted automatically independent
on the number of engine revolutions at dead start (i.e. when the engine revolutions are lower than 1400 rpm).
A very fast dead start can cause overloading of driving gear, increased fuel consumption, excessive wear of tyres and
damage to load. Use dead start on the 1

DEAD START OF TRACTOR IN REGULAR OPERATION - AUTOMATIC DEAD START FUNCTION

 Use the control of travel clutch by reversing lever under the steering wheel for dead start of the tractor.
 Select the slowliest L gear of torque multiplier for dead start of the tractor.
Note: When starting or stopping the engine of the tractor, the fastest gear H is always automatically shifted.
 If the road and reducing speeds shifting lever is shifted in the group of road speeds, shift the lowest gear speed for tractor
dead start with respect for operational conditions.
 Use the lowest possible engine revolutions for tractor´s dead start, such that there is no turn off. After the switch of travel
clutch, increase the engine revolutions according to your needs.

DEAD START BY MEANS OF AUTOMATIC DEAD START FUNCTION

Automatic dead start function is in the shift of reversing lever with engaged applicable gear followed by dead start without using
the clutch pedal or clutch control buttons
1. Start the engine.
2. Shift appropriate gear for starting the engine.
3. Release the manual brake, if you are standing on a slope, brake the tractor by foot brake.
4. When shifting the reversing lever form neutral to the requested direction of tractor drive (forward or backward), the tractor
starts.
5. When you increase the engine revolutions simultaneously, release the foot brake.
When depressing the clutch pedal, the automatic dead start function is put off from operation.
DRIVING OPERATION
st
gear only when driving with heavy trailer to the slope and in difficult terrain.
72