Description Of The Functions Of Individual Positions Of Control Levers Of The Hydraulic Distributor - Zetor FORTERRA HSX 100 2014 Operator's Manual

DESCRIPTION OF THE FUNCTIONS OF INDIVIDUAL POSITIONS OF CONTROL LEVERS OF THE HYDRAULIC
DISTRIBUTOR
Lever position
1
Rear (upper) posi-
tion
2
Central position
3
Front (lower) posi-
tion
4
Front limit position
Note: The lever automatically returns from positions (1) and (3) to the neutral. Not applicable to the section with the kick-out func-
tion.
Always connect a single-acting cylinder to quick couplers
"2", "4" ofthe two-section auxiliary distributor and
"2", "4", "6" of the three-section auxiliary distributor.
Always connect a double-acting cylinder to quick-couplers of one section.
HYDRAULIC SYSTEM
Function
Pressurized oil flows to quick-couplers: "2", "4", "6"
Quick-couplers connected to the return line: "1", "3", "5"
Neutral
Pressurized oil flows to quick-couplers: "1", "3", "5"
Quick-couplers connected to the return line: "2", "4", "6"
With an increased force you can shift the control levers from position (3) further to the
front to position (4), i.e. floating (free) position, where the levers are locked. Both the
quick-couplers of each section are connected to the return line in this position.
FH12N049
127