Toe-In Of The Wheels Of The Front Driving Axle - Zetor FORTERRA HSX 120 Operator's Manual

WHEEL TRACK CHANGE
TOE-IN OF THE WHEELS OF THE
FRONT DRIVING AXLE
Proper toe-in of the front wheels of
tractors with the front driving axle is
0 to 2 mm
and is measured on the front wheel hub
flanges (if the front wheels are installed,
you can measure toe-in on the wheel
rims).
Toe-in "S" is determined by the
difference of the measured values:
S = b - a.
F_02_189
135