Bleeding The Front Cardan Brake; Foot Brake Check - Zetor FORTERRA HSX 120 Operator's Manual

BLEEDING THE FRONT CARDAN BRAKE

Bleeding of the brake systems with installed Cardan brake in tractors with the front
driving axle must be started gradually with both the pairs of the stirrup cylinders. One
pair of the brake stirrup cylinders has 2 bleeding screws (1), the other pair has 3
bleeding screws (2). Do the bleeding with the pedals disconnected in such a way that
you depress one of the pedals slightly and perform the bleeding of one pair of the
brake stirrup cylinders of the 1
and bleed the other pair of the brake stirrup cylinders of the 2
of the front Cardan brake bleed the rear brake.
ADJUSTMENT
st
circuit with the other pedal. Then, change the pedals
F285

FOOT BRAKE CHECK

With the foot brake pedals disconnected
depress the pedal with the maximum
force of approx 500 N. If the pedal can
be depressed almost to the stop consist-
ing in the boss on the bottom part of the
console, the foot brake must be adjusted.
nd
circuit. After bleeding
196
F287