Possible Adjustable Tracks Of The Front Wheels Of The Front Driving Axle Of The Tractors - Zetor FORTERRA HSX 120 Operator's Manual

POSSIBLE ADJUSTABLE TRACKS OF THE FRONT WHEELS OF THE FRONT
DRIVING AXLE OF THE TRACTORS
Used tyres
12.4-24 13.6R24
12.4R24 380/70R24
Front wheel tracks in mm
-
1590∗
1645 1730
1740 1655
1800 1880
1890 1810
1945 2030
2040 1955
WHEEL TRACK CHANGE
12.4-28 14.9-24
14.9R24
420/70R24
- -
1730
1730 -
1810 1880
1880 1810
1955 2030
2030 1955
Note: Use of different tyre dimensions
with individual tractor types - see chapter
Main technical parameters.
Tighten the front wheel nuts with the
torque of 250 - 290 Nm.
Rim position
Tighten the nuts connecting the wheel
bead with the wheel disc with the torque
of 200 - 220 Nm.
You can change the wheel track by
changing the position of the rim and disc.
− Loosen
− Change the track by setting the rim in
− Re-install the screws with washers and
− After
− After driving 100 m with the tractor
− After loading the tractor re-tighten the
− After 10 hours of work check the
134
First, secure the tractor against
moving, lift the axle with a lifting
jack and support it.
the nuts of the
connecting the disc with the rim and
remove the screws.
the required position.
secure them with nuts. Tighten the
nuts with the torque of 230 - 250 Nm.
every loosening of
connection tighten the screws to the
prescribed value.
without load re-tighten the connections
with the prescribed torque.
connections after 3 hours of work.
tightening of the nuts of discs and
wheel rims again.
screws
a bead