Using The Rear Control; External Control Buttons Of The Electro-Hydraulic System; Using The Buttons - Zetor FORTERRA HSX 120 Operator's Manual

USING THE REAR CONTROL

The rear control is used to connect and
disconnect implements.
switching lever (1) on the EHR-B electro-
hydraulic control panel must be in posi-
tion (b) or (c). The designation symbols
of buttons on both the tractor fenders
correspond to the movement direction of
the three-point hitch after their pressing.
The movement only lasts as long as the
button is held.
Every use of the rear control causes
blocking of the control system and the
"Blocking cancellation" must be repeated
- see page 130.
ELECTRO-HYDRAULIC SYSTEM
F_02_98
EXTERNAL CONTROL BUTTONS OF
THE ELECTRO-HYDRAULIC SYSTEM
The lifting 1. Lifting
2. Lowering
The movement only lasts as long as the
buttons are held.
The external control buttons of the
electro-hydraulic system are func-
tional without prior activation of
the system.
FH12N001

USING THE BUTTONS

121
When handling the three-point
hitch with the external control but-
tons the operator must stand out
of reach of the connected imple-
ment to avoid being caught or in-
jured by the implement.
F_02_65