WORK WITH PTO SHAFT
1. When working with PTO shaft mind that all the covers are duly fixed.
2. After completing the work, always mount the cover of PTO shaft back.
3. Any repairs or cleaning of parts of aggregated machines driven by PTO
shaft to be done only with the engine at standstill, disengaged PTO shaft
clutch and the shift gear lever of dependent and independent revolutions of
PTO shaft in N - neutral position.
4. Before starting an aggregated machine driven by PTO shaft, make sure that
there are no unauthorized personnel near, there is a risk of injury.
DRIVE OF AGRICULTURAL MACHINERY
F146
90