Front Pto Shaft; Front Pto Shaft Control - Zetor FORTERRA HSX 120 Operator's Manual

FRONT PTO SHAFT

Front PTO shaft is equipped with a solid
six or twenty-one splined end point and it
comes only in design of
tions.
Tractor may be equipped with front PTO
shaft with varied direction of spinning:
In compliance with the direction
a -
of engine revolutions (standard)
b - Against the direction of engine
revolutions (∗ on request)
DRIVE OF AGRICULTURAL MACHINERY
F_02_64

FRONT PTO SHAFT CONTROL

Engagement and disengagement of front PTO shaft is done by a switch (1) placed on
the right column of the cabin. The switch is equipped with a mechanical lock (2)
1000 revolu- against unwanted switch. When switching the switch depress the lock in the down-
ward direction.
Front PTO shaft is set into activity by switch of a switch.
The engagement of front PTO shaft is signalized by displaying the number of revolu-
tions of front PTO shaft on the display of dashboard.
If the aggregated machine permits, engage front PTO shaft with min.
engine revolutions of 1500 rpm.
FH12N004
103
FH12N009