Front Drive Axle Control; Automatic Disconnection Of Front Drive Axle - Zetor FORTERRA HSX 120 Operator's Manual

FRONT DRIVE AXLE CONTROL

Switching front drive axle on is done by
pressing a button which returns to its
original position after it is released. Dis-
engagement of front drive axle is done
by a repeated depression of a button.
The engagement of front drive axle is
signalized by a lit symbol and a switch.
With a tractor at standstill (tractor
braked, engine stopped, switch box key
off) front drive axle is on
DRIVING OPERATION
AUTOMATIC DISCONNECTION OF
FRONT DRIVE AXLE
When exceeding travel
15 km/h, the drive of front drive axle is
automatically disconnected. Automatic
disconnection of the drive is signalized
by blinking of control in a switch. After
switching off of the blinking control, front
drive axle is automatically disconnected.
With the drop of travel speed under
15 km/h, front drive axle can be con-
nected by a repeated depression of a
button.
With speeds higher than 15 km/h, the
drive of front drive axle can be connected
by repeated depression of a blinking but-
ton.
69
FH12N031
speed of