Engagement Of Rear Pto Clutch - Dependent Revolutions - Zetor FORTERRA HSX 120 Operator's Manual

ENGAGEMENT OF REAR PTO CLUTCH - DEPENDENT REVOLUTIONS

When shifting dependent revolutions of PTO shaft the number and direction of revolutions is dependent on the position of selec-
tion of PTO shaft revolutions switch (2), shifted speed gear, shifted multiplier gear and the position of reversing lever. The number
of revolutions is dependent on the position of road and reduced speeds lever.
When using dependent revolutions of rear PTO shaft, do not use the switch of preselection of rate of starting the rear PTO
shaft (1) and rear PTO shaft switch (3), are not functional.
1. Shift the shifting lever of dependent and independent revolutions to dependent revolutions position (lower position of lever la-
belled PTO synchro).
2. Select applicable revolutions by the switch of selection of rear PTO shaft revolutions (2).
3. When starting the tractor, rear PTO shaft is set in activity.
Engagement of dependent rear PTO shaft is not signalized in any way.
The number of rear PTO shaft revolution is not displayed on the display of dashboard.
DRIVE OF AGRICULTURAL MACHINERY
F73 FH12N007
101