Front Pto Shaft; Maximum Transferred Output; Drive Of Machines With Greater Inertia Masses - Zetor Proxima GP Series Operator's Manual

Front PTO shaft

Front PTO shaft is equipped with a solid six or twenty-one
splined end point and it comes only in design of 1,000
revolutions.
Tractor may be equipped with front PTO shaft with varied
direction of spinning:
a - In compliance with the direction of engine
revolutions (standard)
b - Against the direction of engine revolutions
(*on request)

Maximum transferred output

Output shaft Transferred power
front
-1
1,000 min 60 kW*
rear
-1
1,000 min full engine power
-1
540 min full engine power
-1
540E min full engine power

Drive of machines with greater inertia masses

(crushers, rotary harrows, reaping machines, etc.)
Cardan shaft for drive of these machines must be
equipped with the so called freewheel clutch which
ensures disconnection of torque transfer with retroaction
from the machine on the tractor.
DRIVE OF FARMING MACHINES
P15N038
69
F_02_64
troj