Improper Use; Technical Limit Values - ABB 265DS Operating Instruction

Safety
Pos: 5.7 /Überschriften/1.1/1-spaltig/A - C/Bestimmungswidrige Verwendung @ 2\mod_1149665909453_3101.doc @ 28255
1.3

Improper use

Pos: 5.8 /Sicherheit/Druck/Druckmessumformer/Allgemein/Bestimmungswidrige Verwendung @ 2\mod_1149665809078_3101.doc @ 28234
It is prohibited to use the device for the following purposes:
• As a climbing aid, e.g., for mounting purposes
• As a support for external loads, e.g., as a support for pipes, etc.
• Adding material, e.g., by painting over the name plate or welding/soldering on parts
• Removing material, e.g., by drilling the housing.
Pos: 5.9 /Sicherheit/Allgemein/Hinweis zur bestimmungswidrigren Verwendung (Wartung/Reparatur) @ 0\mod_1129707002440_3101.doc @ 3240
Repairs, alterations, and enhancements, or the installation of replacement parts, are only
permissible insofar as these are described in the manual. Approval by ABB Automation
Products GmbH must be sought for any activities beyond this scope. Repairs performed by
ABB-authorized specialist shops are excluded from this.
Pos: 5.10 /Überschriften/1.1/1-spaltig/S - U/Technische Grenzwerte @ 2\mod_1149666209312_3101.doc @ 28297
1.4

Technical limit values

Pos: 5.11 /Sicherheit/Druck/Druckmessumformer/Allgemein/Technische Grenzwerte @ 2\mod_1149666073078_3101.doc @ 28276
The device is designed for use exclusively within the values stated on the name plate and within
the technical limit values specified on the data sheets.
The following technical limit values must be observed:
• The permitted pressure may not be exceeded.
• The maximum operating temperature may not be exceeded.
• The permitted operating temperature may not be exceeded.
• The housing protection type must be observed.
Pos: 5.12 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830
8 265Dx, 265VS IM/265D/V-EN-02