8.1.3
Transmitter with FOUNDATION Fieldbus communication
Parameters
Measuring profile
Physical unit
Output scale 0 %
Output scale 100 %
Output
Upper alarm limit
Upper warning limit
Lower warning limit
Lower alarm limit
Hysteresis limit value
PV filter
Address
Any or all of the configurable parameters listed above - including the lower and upper range
values - can be changed using any FOUNDATION Fieldbus-compatible configuration tool. Data
regarding flange type and material, O-ring materials, and type of filling liquid is stored in the
device.
Pos: 19.5 /Überschriften/1.1/1-spaltig/J - L/Konfigurationsarten @ 0\mod_1140521210140_3101.doc @ 3196
8.2
Configuration types
Pos: 19.6 /Konfiguration, Parametrierung/Druck/Druckmessumformer/Allgemein/Konfigurationsarten @ 2\mod_1150098392546_3101.doc @ 29440
Pressure transmitters can be configured as follows:
•
Configuration of the parameters for the lower and upper range values, without an LCD
display
•
Configuration of the pressure transmitter using the LCD display (menu-controlled)
•
Configuration with a handheld terminal
•
Configuration using a PC/laptop via the graphical user interface (DTM)
Pos: 19.7 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830
IM/265D/V-EN-02
Factory settings
Pressure
mbar/bar
Lower range limit (LRL)
Upper range limit (URL)
Linear
Upper range limit (URL)
Upper range limit (URL)
Lower range limit (LRL)
Lower range limit (LRL)
0.5 % of output scale
0.125 sec.
Not required
265Dx, 265VS
Configuration
47