Menu-Controlled Pressure Transmitter Programming - ABB 265DS Operating Instruction

Pos: 19.21 /Überschriften/1.1/1-spaltig/M - O/Menügesteuerte Programmierung des Druckmessumformers @ 2\mod_1150101484046_3101.doc @ 29545
8.6

Menu-controlled pressure transmitter programming

Pos: 19.22 /Konfiguration, Parametrierung/Druck/Druckmessumformer/Allgemein/Menügesteuerte Programmierung des Druckmessumformers @ 17\mod_1201185787890_3101.doc @ 154202
Function
Start
Next menu item
Previous menu item
Activate submenu items/selection
lists
Change a numerical value
Acknowledge changes
Exit
The next section contains the full menu structure, which provides an overview of the selection
and programming options.
Important
The button unit must be available for this purpose. Operating the buttons using a magnetic
screwdriver is not permitted.
Pos: 19.23 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830
IM/265D/V-EN-02
Description
Menu-controlled programming is started with the mode
button "M".
The next menu item is called up by pressing the "+"
button.
Press the "-" button to return to the previous menu item.
Submenu items and selection lists are activated by
pressing the mode button "M".
A numerical value can only be changed by means of
the "+" and "-" buttons. Please note that the "+" button
changes the value (each time the button is pressed, the
value increases by 1), while the "-" button is used to go
to the position of the value to be changed.
Changes are acknowledged by pressing the mode
button "M". Confirming this (by pressing "OK") writes
the value to the non-volatile memory.
Once setting is complete, the program can be exited via
the "EXIT" menu item (acknowledge with the mode
button "M").
265Dx, 265VS
Configuration
57