Profibus Pa Output; Foundation Fieldbus Output - ABB 265DS Operating Instruction

Pos: 23.32 /Überschriften/1.1.1/1-spaltig/PROFIBUS PA-Ausgang @ 5\mod_1165392154421_3101.doc @ 50337

10.4.2 PROFIBUS PA output

Pos: 23.33 /==== Wechsel ein- auf zweispaltig ==== @ 0\mod_1130421847171_3101.doc @ 3828
Change from one to two columns
Pos: 23.34 /Technische Daten / Datenblatt/Druck/Druckmessumformer/265Dx, 265Vx/PROFIBUS PA-Ausgang @ 5\mod_1164188760546_3101.doc @ 49270
Model
Pressure transmitter conforming to Profile 3.0, Class A and B;
ID number 04C2 HEX
Power supply
The transmitter is operated at 10.2 ... 32 VDC (no polarity).
The supply voltage must not exceed 17.5 VDC when used in EEx ia
zones.
Intrinsically safe installation in accordance with FISCO model.
Current consumption
Operating (quiescent):
Fault current limit value:
Output signal
Physical layer in accordance with IEC 1158-2/EN 61158-2;
transmission using Manchester II modulation at 31.25 kbit/sec.
Output interface
PROFIBUS PA communication according to Profibus DP50170 Part
2/DIN 19245 Part 1-3
Change from one to two columns
Pos: 23.36 /==== Leeres Modul mit zwei Absatzmarken, DS, 1-spaltig ==== @ 3\mod_1159257408468_0.doc @ 42813
Pos: 23.37 /Überschriften/1.1.1/1-spaltig/FOUNDATION-Fieldbus-Ausgang @ 5\mod_1165392250328_3101.doc @ 50358

10.4.3 FOUNDATION Fieldbus output

Pos: 23.38 /==== Wechsel ein- auf zweispaltig ==== @ 0\mod_1130421847171_3101.doc @ 3828
Change from one to two columns
Pos: 23.39 /Technische Daten / Datenblatt/Druck/Druckmessumformer/265Dx, 265Vx/FOUNDATION Fieldbus-Ausgang @ 5\mod_1164188958671_3101.doc @ 49291
Power supply
The transmitter is operated at 10.2 ... 32 VDC (no polarity).
The supply voltage must not exceed 17.5 VDC when used in EEx ia
zones.
Intrinsically safe installation in accordance with FISCO model.
Current consumption
Operating (quiescent):
Fault current limit value:
Output signal
Physical layer in accordance with IEC 1158-2/EN 61158-2;
transmission using Manchester II modulation at 31.25 kbit/sec.
Function blocks/execution time
265Dx: 2 standard analog input function blocks/maximum 25 ms
265Vx: 1 standard analog input function block/maximum 25 ms
1 standard PID function block
Additional blocks
1 manufacturer-specific pressure with calibration transducer block
1 enhanced resource block
Change from one to two columns
Pos: 23.41 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830
IM/265D/V-EN-02
11.7 mA
Maximum 17.3 mA
11.7 mA
Maximum 17.3 mA
Output cycle time
40 ms
Function blocks
265Dx: 2 standard analog input function blocks
265Vx: 1 standard analog input function block
1 transducer block
1 physical block
LCD display (optional)
19-segment alphanumeric display (two lines, six characters) with
additional bar chart display; option of backlighting.
Customized display:
Output value in percent or OUT (analog input)
Diagnostic messages, alarms, measuring range upper limit violations,
and changes to the configuration are also displayed.
Transmitter interference mode
Permanent self-diagnosis; potential errors indicated in diagnostic
parameters and in the status of process values.
Pos: 23.35 /==== Wechsel zwei- auf einspaltig ==== @ 0\mod_1130421955859_3101.doc @ 3829
Number of link objects
10
Number of VCRs
16
Output interface
FOUNDATION
accordance with standard H1; complies with specification V. 1.5.
FF registration no.: IT023600
LCD display (optional)
19-segment alphanumeric display (two lines, six characters) with
additional bar chart display; option of backlighting.
Customized display:
Output value in percent or OUT (analog input)
Diagnostic messages, alarms, measuring range upper limit violations,
and changes to the configuration are also displayed.
Transmitter interference mode
Permanent self-diagnosis; potential errors indicated in diagnostic
parameters and in the status of process values.
Pos: 23.40 /==== Wechsel zwei- auf einspaltig ==== @ 0\mod_1130421955859_3101.doc @ 3829
265Dx, 265VS
Technical data
Fieldbus digital communication protocol in
71