Securing The Housing Cover With Eex D - ABB 265DS Operating Instruction

Pos: 15.20 /Überschriften/1.1/1-spaltig/G - I/Gehäusedeckel sichern bei EEx d @ 2\mod_1149844920390_3101.doc @ 29222
6.7

Securing the housing cover with EEx d

Pos: 15.21 /Inbetriebnahme/Druck/Druckmessumformer/Allgemein/Gehäusedeckel sichern bei EEx d @ 2\mod_1149845029468_3101.doc @ 29243
Each of the front faces of the electronics housing features a locking screw (hex-head socket
screw SW 3) on the top right-hand side.
1. Attach the housing cover to the housing by hand-tightening the screws.
2. Turn the locking screw counterclockwise to secure the housing cover. This involves
unscrewing the screw until the screw head stops at the housing cover.
Fig. 16: Securing the housing cover
1 Locking screw
Pos: 16 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830
IM/265D/V-EN-02 265Dx, 265VS
Commissioning
1
M00044
43