Table of Contents
Advertisement
1.4
Improper use
It is prohibited to use the device for the following purposes:
•
As a climbing aid, e.g., for mounting purposes
•
As a support for external loads, e.g., as a support for pipes, etc.
•
Adding material, e.g., by painting over the name plate or welding/soldering on parts
•
Removing material, e.g., by drilling the housing.
1.5
Target groups and qualifications
Installation, commissioning, and maintenance of the product may only be performed by trained
specialist personnel who have been authorized by the plant operator to do so. The specialist
personnel must have read and understood the manual and comply with its instructions.
Prior to using corrosive and abrasive materials for measurement purposes, the operator must
check the level of resistance of all parts coming into contact with the materials to be measured.
ABB Automation Products GmbH will gladly support you in selecting the materials, but cannot
accept any liability in doing so.
The operators must strictly observe the applicable national regulations with regards to
installation, function tests, repairs, and maintenance of electrical products.
1.6
Warranty provisions
Using the device in a manner that does not fall within the scope of its intended use, disregarding
this instruction, using underqualified personnel, or making unauthorized alterations releases the
manufacturer from liability for any resulting damage. This renders the manufacturer's warranty
null and void.
IM/265Gx/Ax-EN-07
265Gx, 265Ax
Safety
7
Advertisement
Table of Contents
