Operation; Operation Using The Buttons On The Transmitter - ABB 265DS Operating Instruction

Operation

Pos: 17.1 /Überschriften/1/A - C/Bedienung @ 1\mod_1144675546171_3101.doc @ 5944
7 Operation
Pos: 17.2 /Überschriften/1.1/1-spaltig/A - C/Bedienung mit den Tasten am Messumformer @ 2\mod_1150094711453_3101.doc @ 29314
7.1

Operation using the buttons on the transmitter

Pos: 17.3 /Bedienung/Druck/Druckmessumformer/Allgemein/Bedienung mit den Tasten am Messumformer @ 2\mod_1150095014343_3101.doc @ 29336
The control unit on the transmitter consists of 2 buttons for external setting of the "lower range
value" (0 %) and "upper range value" (100 %) parameters, as well as a write protection switch.
Important
No housing entries are required for the buttons or switch.
To access the buttons, the screw must be slackened and the protective cap moved to one side
(see Fig. 17).
Fig. 17: Control elements
1 Protective cap
2 Mode button (M)
Fig. 18: Plate with button legend, etc.
Warning - Potential damage to parts
Operating the control buttons with a magnetic screwdriver is not permitted.
Pos: 18 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830
44
1
2
265Dx, 265VS
3 Buttons
3
M00054
M00055
IM/265D/V-EN-02