Intended Use - ABB 265DS Operating Instruction

• The regulations and guidelines relating to explosion protection, if explosion-proof
transmitters are to be installed
Warning - General risks
The device can be operated at high levels of pressure and with aggressive media.
As a result, serious injury or significant property damage may occur if this device is operated
incorrectly.
The regulations, standards, directives, and laws referred to in these operating instructions are
applicable in Germany. When using the transmitter outside the scope of German federal
jurisdiction, the regulations, standards, and directives applicable in the country where the device
is being used must be observed.
Pos: 5.4 /Überschriften/1.1/1-spaltig/A - C/Bestimmungsgemäße Verwendung @ 1\mod_1147675805609_3101.doc @ 10755
1.2

Intended use

Pos: 5.5 /Sicherheit/Druck/Druckmessumformer/Druckmessumformer 265Dx, 265Vx/Bestimmungsgemäße Verwendung @ 5\mod_1163757186312_3101.doc @ 48495
Measuring tasks
Type 265Dx:
Type 265Vx:
Measuring ranges:
Type 265Dx:
Type 265Vx:
The transmitters can be overloaded on one side.
Using these products as intended involves observing the following points:
• Read and follow the instructions in this manual.
• Observe the technical ratings (refer to the section "Technical data").
Pos: 5.6 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830
IM/265D/V-EN-02
Differential pressure, flowrate, or level of gases, vapors, and liquids
Absolute pressure of gases, vapors, and liquids
10 mbar to 100 bar (staggered), for nominal pressure ratings PN 6 (sensor
code A only), PN 160, PN 250, or PN 410
400 mbar abs to 20 bar abs (staggered), for nominal pressure ratings
PN 160, PN 250, or PN 410
265Dx, 265VS
Safety
7