Ce Godkännanden, Information; Montage; Krav På Installationsmiljö - ABB SLT900 Operating Instructions Manual

Submersible level transmitter for water/waste and the process industry
Table of Contents

Advertisement

9.3 CE godkännanden, information
Vi intygar härmed att vi är tillverkare av transmitterserien SLT900 och att
produkterna uppfyller kraven i nedan angivna EU direktiv:
Direktiv 89/336/EEC från maj 1989 i överensstämmelse med standaderna.
RFI utstrålning enligt
EN 50081-1 1993
EMI/RFI instrålning
EN 50082-1 1995
Direktiv 97/23/EG (Pressure Equipment Directive, PED)
Enligt standarden
APED 1999/AFS1999:4 med följande undantag:
om produkten används som säkerhetsutrustning måste den CE märkas i den
kompletta anläggningen.
Transmitterserien SLT900 uppfyller kraven i dessa EU direktiv för att få
märkas med CE märke.

9.4 Montage

9.4.1 Krav på installationsmiljön
Omgivningstemperatur:
Relativ fuktighet
Mediatemperatur:
Vibrationer:
Täthetsklass:
Monteringsriktning:
7
- 20...+ 80 °C
< 100%, icke kondenserande
-20 till +80 °C
Kortvarigt 90 °C
Maximala värden
3-25 Hz, amplitud 1,6 mm
25-60 Hz, amplitud 0,21 mm
60-100 Hz, accel. 19,6 m/s2
Sond bättre än IP68
Mätsond: Alla riktningar tillåtna
9.3 CE compliance information
We herewith declare that we are the manufacturer of the transmitter SLT900
and that the device meets the requirements of the EC directives stated below:
Directive 89/336/EEC as of May 1989 due to compliance with the following
standards:
RFI suppression
EN 50081-2 1993
EMI/RFI shielding
EN 50082-2 1995
Directive 97/23/EG (Pressure Equipment Directive, PED)
Basic technical standards/product standards
APED1999/AFS1999:4 with the following exceptions:
if the product is used as safety equipment it must be CE marked in the
complete construction.
The transmitter SLT900 meets the requirements of the EC directives for CE
conformity certification.
9.4 Mounting
9.4.1 Operating conditions at the installation site
Ambient temperature:
Relative humidity
Media temperature:
Vibrations:
Protection:
Mounting orientation:
- 20...+ 80 °C
100%, non condensing
-20 to +80 °C
Short time 90 °C
Max values
3-25 Hz, amplitude 1,6 mm
25-60 Hz, amplitude 0,21 mm
60-100 Hz, accel. 19,6 m/s2
Probe better than IP68
Probe: Any orientation allowed

Advertisement

Table of Contents
loading

Table of Contents