Menu-Controlled Pressure Transmitter Programming - ABB 265GS Operating Instruction

7.6

Menu-controlled pressure transmitter programming

Function
Start
Next menu item
Previous menu item
Activate submenu items/selection
lists
Change a numerical value
Acknowledge changes
Exit
The next section contains the full menu structure, which provides an overview of the selection
and programming options.
IMPORTANT (NOTE)
The button unit must be available for this purpose. Operating the buttons using a magnetic
screwdriver is not permitted.
IM/265Gx/Ax-EN-07
Description
Menu-controlled programming is started with the mode
pushbutton "M".
The next menu item is called up by pressing the "+"
pushbutton.
Press the "-" pushbutton to return to the previous menu
item.
Submenu items and selection lists are activated by
pressing the mode pushbutton "M".
A numerical value can only be changed by means of
the "+" and "-" pushbuttons. Please note that the "+"
pushbutton changes the value (each time the button is
pressed, the value increases by 1), while the "-" button
is used to go to the position of the value to be changed.
Changes are acknowledged by pressing the mode
pushbutton "M". Confirming this (by pressing "OK")
writes the value to the non-volatile memory.
Once setting is complete, the program can be exited via
the "EXIT" menu item (acknowledge with the mode
pushbutton "M").
265Gx, 265Ax
Configuration
59