Engage Cable Specifications - enphase M215-60-2LL-S23-IG Installation And Operation Manual

M215-60-2LL-S22, S23 or S24 Microinverter Parameters
Topic
Compatibility
Dimensions not including mounting bracket (approximate)
Weight
Enclosure environmental rating
Torque specifications for fasteners
(Do not over torque.)
Torque specification for 10/32 ground cleat
Cooling
Communication
Standard warranty term
Compliance
Integrated DC disconnect
Integrated AC disconnect

Engage Cable Specifications

Specification
System temperature range (ambient)
Cable temperature rating
Cable type
Cable conductor insulator rating
Environmental protection rating
UV exposure rating: terminator, engage coupler, and drop
connector body
Sunlight resistance (cable)
Compliance
Conductor size
Cable diameter
Minimum bend radius
Drop connector dimensions
Terminator cap dimensions
39
Features and Specifications
 2014 Enphase Energy Inc. All rights reserved.
M215 Installation and Operation
Unit
Pairs with most 60-cell PV modules
163 mm x 173 mm x 2.5 mm (6.4" x 6.8" x 1.0")
3.4 Lbs (1.6 Kg)
NEMA 6

6 mm (1/4") mounting hardware: 5 N m (45 to
50 in-lbs)

8 mm (5/16") mounting hardware: 9 N m (80
to 85 in-lbs)
2 N m (20 to 25 in-lbs). Do not over torque.
Natural convection: no fans
Power line
http://enphase.com/warranty
UL1741, IEEE1547, FCC Part 15 Class B
CAN/CSA-C22.2 NO. 0-M91, 0.4-04, and 107.1-01
The DC connector has been evaluated and
approved for use as the load-break disconnect
required by the NEC.
The AC connector has been evaluated and
approved for use as the load-break disconnect
required by the NEC.
Value
-40ºC to +65ºC (-40ºF to 149ºF)
90ºC Dry / 90ºC Wet
TC-ER
THWN-2
IEC 60529 IP67
UL 746 C, F1
UL 1277
UL486A/B, UL 514C, UL6703, UL 9703, IEC
60529 IP67, CAN/CSA 22.2 No. 21, 182.3
12 AWG
1.25 cm (0.49")
4.75 inches (12 cm)
11.8 cm x 6.0 cm x 3.2 cm (4.64" x 2.36" x 1.25")
3.6 cm diameter x 5.1 cm tall (1.4" x 2")
Min Typical Max
141-00012 Rev 06