Table of Contents
Advertisement
Build the Virtual Array
When the system is energized and the Envoy detects at least one microinverter, create the virtual array in
Enlighten from the installation map you created.
You can scan and upload the paper copy of the Installation Map, or you can use the ArrayGun feature
from the Enphase Installer Toolkit to easily build and configure a system. Refer to
http://enphase.com/products/arraygun/
To scan and upload the map and build the array:
1. Scan the installation map and upload it to the Activation form online.
2. Use Array Builder to create the virtual array in Enlighten. Use the installation map created in
Installation step 10 as your reference.
NOTE: Go to
3. If you do not already have an account, go to
Login" to register.
Once the virtual array is built, Enlighten displays a graphic representation of the PV system. It also shows
detailed current and historical performance information. Go to
information on the Enphase Enlighten web-based monitoring and analysis.
26
for more information.
http://enphase.com/support/videos/
2014 Enphase Energy Inc. All rights reserved.
M215 Installation and Operation
to view the Array Builder demo.
http://www.enphase.com
http://www.enphase.com
and click "Enlighten
for more
141-00012 Rev 06
Hide quick links:
Advertisement
Table of Contents
