Iq Cable Specifications - enphase IQ7+ Installation And Operation Manual

Overvoltage class AC port
Number of input DC connectors (pairs)
per single MPP-tracker
AC connector type
DC connector type
Dimensions (HxWxD)
Weight (with mounting plate)
Cooling
Enclosure
IP Rating
Maximum altitude
Calorific value
Grid compliance
Safety
Anti-Islanding
EMC
Product labelling
Advanced grid functions
Microinverter communication
1. No enforced DC/AC ratio and maximum input power. Modules can be paired if the maximum input voltage is not exceeded and the
maximum input current of the inverter at the lowest and highest temperatures is respected. See the compatibility calculator at
compatibility.
2. Some of these functions require IQ Gateway Metered with current transformers and/or IQ Relay installed.
*** The maximum input power values are recommended to address region-specific requirements.

IQ Cable specifications

Specification
Voltage rating
Voltage withstand test (kV/1min)
30
IQ7A-72-2-INT Microinverter parameters
III
1
IQ Cabling (refer to separate datasheet for cable and
accessories)
Staubli MC4 (using Q-DCC-2 adapter)
212 mm (8.3") x 175 mm (6.9") x 30.2 mm (1.2") (without
mounting brackets)
1.08 kg (2.38 lbs)
Natural convection – no fans
Class II double-insulated, corrosion-resistant polymeric
enclosure
Outdoor - IP67
2,600 metres
37.5 MJ/unit
Compliance
IEC 62109-1, IEC-62109-2/IS 16221; IEC 61727
EN IEC 62109-1, EN IEC 62109-2
IEC 62116/IS 16169
EN IEC 61000-3-2, 61000-3-3, 61000-6-2, 61000-6-3, EN IEC
50065-1, 50065-2-1
CE and BIS
Power export limiting (PEL), phase imbalance management
2
(PIM), loss of phase detection (LOP), power factor control Q
(U), cos (phi) (P)
Power line communication (PLC) 110−120 kHz (Class B), narrow
band 200 Hz
© 2023 Enphase Energy Inc. All rights reserved.
IQ7+ and IQ7A Installation and Operation Manual - India
Q-12 single-phase cable
600 V
AC 3.0
module
August 2023
USM-00002-1.0