Table of Contents
Advertisement
M215-60-2LL-S22-IG, S23-IG, or S24-IG
Topic
Compatibility
Dimensions not including mounting bracket (approximate)
Weight
Enclosure environmental rating
Torque specifications for fasteners
(Do not over torque.)
Cooling
Communication
Standard warranty term
Compliance
Integrated ground (no GEC required)
Integrated DC disconnect
Integrated AC disconnect
M215-60-2LL-S22, S23 or S24 Specifications
M215-60-2LL-S22, S23 or S24 Microinverter Parameters
Topic
MPPT voltage range
Operating range
Maximum DC input voltage
Minimum / Maximum start voltage
Maximum DC input short circuit current
Maximum DC input current
Ground fault protection
Maximum input source backfeed current to input source
37
Features and Specifications
DC Parameters
2014 Enphase Energy Inc. All rights reserved.
M215 Installation and Operation
Microinverter Parameters
Unit
Pairs with most 60-cell PV modules (the PV
module DC conductors must be labeled "PV Wire"
or "PV Cable" to be compliant with NEC
690.35(D) for Ungrounded PV Power Systems)
163 mm x 173 mm x 2.5 mm (6.4" x 6.8" x 1.0")
3.4 Lbs (1.6 Kg)
NEMA 6
6 mm (1/4") mounting hardware: 5 N m (45 to
50 in-lbs)
8 mm (5/16") mounting hardware: 9 N m (80
to 85 in-lbs)
Natural convection: no fans
Power line
http://enphase.com/warranty
UL1741, IEEE1547, FCC Part 15 Class B
CAN/CSA-C22.2 NO. 0-M91, 0.4-04, and 107.1-01
The DC circuit meets the requirements for
ungrounded PV arrays in NEC 690.35. Ground
fault protection (GFP) is integrated into the
microinverter.
The DC connector has been evaluated and
approved for use as the load-break disconnect
required by NEC 690.
The AC connector has been evaluated and
approved for use as the load-break disconnect
required by NEC 690.
Unit
V
V
V
V
A
A
mA
A
Min
Typical
Max
Min
Typical
Max
22
36
16
36
45
22
45
15
10.5
1000
0
141-00012 Rev 06
Hide quick links:
Advertisement
Table of Contents
