The Enphase Microinverter System - enphase M215-60-2LL-S23-IG Installation And Operation Manual

The Enphase Microinverter System

The Enphase Microinverter
use in utility-interactive applications.
This manual details the safe installation and operation of the Enphase Microinverter.

With the M215-60-2LL-S22-IG, S23-IG, or S24-IG, the DC circuit within the M215 is isolated and
insulated from ground. Ground fault protection (GFP) is integrated into the microinverter. Because
of this, the M215-60-2LL-IG does not require a GEC. As a result, it takes less time to install than
other microinverters, saves money, and increases safety.

If you are installing the M215-60-2LL-S22, S23, or S24, this microinverter requires a GEC or
other compliant grounding method.
The three key elements of an Enphase Microinverter System include the:

Enphase M215 Microinverter

Enphase Envoy

Enphase Enlighten
This integrated system maximizes energy harvest, increases system reliability, and simplifies design,
installation and management.
8
®
System™ is the world's most technologically advanced inverter system for
®
Communications Gateway™
®
web-based monitoring and analysis software
 2014 Enphase Energy Inc. All rights reserved.
M215 Installation and Operation
141-00012 Rev 06