Engage Cable Specifications - enphase M215-60-2LL-S25-IG Manual

Topic
Compatibility
Dimensions not including mounting bracket (approximate)
Weight
Enclosure environmental rating
Torque specifications for fasteners
(Do not over torque.)
Cooling
Communication
Standard warranty term
Compliance
Integrated ground (no GEC required)
Integrated DC disconnect
Integrated AC disconnect

Engage Cable Specifications

Specification
System temperature range (ambient)
Cable temperature rating
Cable rating
Conductor insulator rating
Environmental protection rating
UV exposure rating
Compliance
Conductor size
Cable diameter
Minimum bend radius
Drop connector dimensions
Terminator cap dimensions
31
Enphase M250 Microinverter Parameters
Features and Specifications
 2013 Enphase Energy Inc.
M250 Installation and Operation
Unit
Pairs with most 60-cell PV modules (the PV
module DC conductors must be labeled "PV Wire"
or "PV Cable" to be compliant with NEC 690.35(D)
for Ungrounded PV Power Systems)
171 mm x 173 mm x 30 mm
2 Kg
NEMA 6

6 mm (1/4") mounting hardware: 5 N m (45 to
50 in-lbs)

8 mm (5/16") mounting hardware: 9 N m (80
to 85 in-lbs)
Natural convection: no fans
Power line
http://enphase.com/warranty
UL1741, IEEE1547, FCC Part 15 Class B
CAN/CSA-C22.2 NO. 0-M91, 0.4-04, and 107.1-01
The DC circuit meets the requirements for
ungrounded PV arrays in NEC 690.35
The DC connector has been evaluated and
approved for use as the load-break disconnect
required by NEC 690.
The AC connector has been evaluated and
approved for use as the load-break disconnect
required by NEC 690.
Value
-40C to +65C (-40F to +149F)
+90C Dry / +90C Wet
TC-ER
THWN-2
IEC 60529 IP67
UL 746 C, F1
UL 486A/B, UL 514C, UL 6703, UL 9703, IEC
60529 IP67, CAN/CSA 22.2 No. 21, 182.3
12 AWG
1.25 cm (0.49")
4.75 inches (12 cm)
11.8 cm x 6.0 cm x 3.2 cm (4.64" x 2.36" x 1.25")
3.6 cm diameter x 5.1 cm tall (1.4" x 2")
Min Typical Max
141-00022 Rev 01