Engage Cable Planning And Ordering; Selecting Cable Type; Connector Spacing Options - enphase M215-60-2LL-S23-IG Installation And Operation Manual

M215 Installation and Operation

Engage Cable Planning and Ordering

2
The Engage Cable is a continuous length of 2.5 mm (12 AWG), outdoor-rated cable with integrated
connectors for microinverters. These connectors are preinstalled along the Engage Cable at intervals to
accommodate PV module widths. The microinverters plug directly into the cable connectors.
The cabling is compatible with a variety of PV racking systems. For a list of approved PV racking
systems, refer to the PV Racking Compatibility document on the Enphase website
(http://www.enphase.com/support).

Selecting Cable Type

Enphase Engage Cable is available in two different voltage types and two connector spacing options.
Depending upon installer needs, the cable is also available in different lengths.

Connector Spacing Options

The gap between connectors on the cable can be either 1.025 meters (40") or 1.7 meters (67"). The
1.025 meter spacing is best suited for connecting PV modules installed in portrait orientation, while the
1.7 meter gap is best suited to PV modules installed in landscape orientation.
 2014 Enphase Energy Inc. All rights reserved.
32
141-00012 Rev 06