Ethernet Option Board (Cp1W-Cif41) - Omron G9SP-N20S Operation Manuals

Option Units
2-3-2

Ethernet Option Board (CP1W-CIF41)

Part Names and Connector Arrangement
Communications Status Indicators
Item
Connection method
Maximum transmission distance With a baud rate of 9,600 bps: 15 m
Communications protocol
Maximum data length
Frame format Start code
End code
Communica- Baud rate
tions settings
Parameters
Current consumption
Weight
IP ADDRESS:
SUBNET MASK:
COMM ERR 10BASE-T
100BASE-TX
Indicators
Indicate the operating status of the Option Board.
LED Color
COMM Yellow Not lit
Lit
ERR Red Not lit
Lit
Flashing
Specification
D-sub, 9-pin female connector
With a baud rate of 115,200 bps: 3 m
No-protocol
SECTION 7 Communications with a Standard PLC
Using an Option Board
0040 hex
Reception bytes: 198
9,600 or 115,200 bps (unit version 2.0 or later)
Data length: 8 bits
Stop bits: 1 bit
Parity: Even
Included in the current consumption of the G9SP-
series Controller.
Included in the weight of the G9SP-series Control-
ler.
IP Address Label
A label is provided so that the user can enter the
IP address and subnet mask and attach them to
the front of the Unit.
Always enter this information and attach the label
to the Unit.
Ethernet Connector
Used to connect the Ethernet twisted-pair cable.
Status
Not sending or receiving data.
Sending or receiving data.
The Ethernet Option Board is normal.
A fatal communications error has occurred in
the Ethernet Option Board.
A non-fatal communications error has
occurred in the Ethernet Option Board.
Section 2-3
Meaning
49