Omron G9SP-N20S Operation Manuals page 134

Functionality for All Option Board's
Safety Output Terminal Data Flags
Bit 7
+0 So 07
+1 So 15
+2 Reserved
+3 Reserved
Safety Input Terminal Status Flags
Bit 7
+0 Si 07
+1 Si 15
+2 Reserved
+3 Reserved
+4 Reserved
+5 Reserved
Safety Output Terminal Status Flags
Bit 7
+0 So 07
+1 So 15
+2 Reserved
+3 Reserved
108
Bit 6 Bit 5
So 06 So 05
So 14 So 13
The flags show the ON/OFF values monitored for Safety Output terminals.
0: Output terminal OFF.1: Output terminal ON.
Bit 6 Bit 5
Si 06 Si 05
Si 14 Si 13
These flags are the normal status flags for self-diagnosis of the Safety Input
terminals. They are used to monitor for Safety Input terminal errors, such as
disconnected lines, ground fault, and short-circuit.
0: Error.1: Normal operation (no error).
Bit 6 Bit 5
So 06 So 05
So 14 So 13
These flags are the normal status flags for self-diagnosis of the Safety Output
terminals. They are used to monitor for Safety Output terminal errors, such as
disconnected lines, ground fault, and short-circuit.
0: Error.1: Normal operation (no error).
Bit 4 Bit 3
So 04 So 03
So 12 So 11
Bit 4 Bit 3
Si 04 Si 03
Si 12 Si 11
Si 19
Bit 4 Bit 3
So 04 So 03
So 12 So 11
Section 7-1
Bit 2 Bit 1
So 02 So 01
So 10 So 09
Bit 2 Bit 1
Si 02 Si 01
Si 10 Si 09
Si 18 Si 17
Bit 2 Bit 1
So 02 So 01
So 10 So 09
Bit 0
So 00
So 08
Bit 0
Si 00
Si 08
Si 16
Bit 0
So 00
So 08