Omron G9SP-N20S Operation Manuals page 97

Installation
Windows XP
1,2,3...
The procedure to install the driver on a Windows XP computer is given in this
section.
1. Turn ON the power supply to the G9SP-series Controller and connect the
USB port on the G9SP-series Controller to a USB port on the computer
using a USB cable.
The computer will automatically detect the G9SP-series Controller when
the cable is connected and display a message saying that new hardware
has been detected. The Add Hardware Wizard will also be displayed.
2. In the Found New Hardware
Wizard Dialog Box, select
the No, not this time option
and click the Next Button.
3. Select the Install from a list
or specific location (Ad-
vanced) Option and click the
Next Button.
4. Select the Search the best
driver in these locations
Check Box and select only
the Include this location in
the search Option. Specify
the directory where the USB
driver was saved (given pre-
viously) as the location to
search and click the Next
Button.
Section 5-2
71