Specifications; Operation Rights; Starting The G9Sp Configurator When Manipulating User-Defined Function Blocks - Omron G9SP-N20S Operation Manuals

Creating and Using User-defined Function Blocks
6-5-2

Specifications

6-5-3

Operation Rights

6-5-4 Starting the G9SP Configurator When Manipulating User-defined
Function Blocks
Windows XP
1,2,3...
Windows Vista or Later
1,2,3...
98
The specifications of user-defined function blocks are given below.
Item
Maximum number of I/O terminals
Maximum number of function blocks
Maximum number of pages
Maximum number of jump tags
I/O comment size
Nesting user-defined function blocks
Operation rights for user-defined function blocks include a password and acti-
vation key. Restrictions in user-defined function block operations are given
below.
Passwords Editable
Read only
Activation key
An activation key is used to prevent unintentional importing of user-defined
function blocks.
To set operation rights, right-click the function block that you created in the
Project Window. Operation rights can also be set when creating a new user-
defined function block.
You must have administrator rights to create, edit, save, delete, or import user-
defined function blocks. To achieve this, use the following procedure to start
the G9SP Configurator.
1. Log on as a user with administrator rights.
2. Start the G9SP Configurator.
1. Select Programs (All Programs) - OMRON G9SP Configurator from the
Windows Start Menu.
2. Right-click G9SP Configurator.
3. Select Run as administrator from the pop-up menu that is displayed.
Specification
Input terminals: 32, Output terminals: 16
128
32
64
48 alphanumeric characters
Not supported
Editable Accessing
and
monitoring
OK OK
--- OK
--- ---
Section 6-5
Importing
OK
OK
OK