Henny Penny EVOLUTION ELITE EEG-241 Operator's Manual page 68

5-1.
MODIFYING
PRODUCT SETTINGS
(CONT.)
March 2014
>Load Compensation, Load Compensation Reference, Full Heat, PC
Factor<
Press ► button until "LD COMP" shows in the display, along with
13.
the load compensation value. This automatically adjusts the time to
account for the size and temperature of the cooking load. Press the
product buttons, or the ▲ and ▼ buttons, to change this value of 0 to
20.
Press ► button until "LCMP REF" shows in the display along with
14.
the load compensation average temperature. (if load compensation
is set to "OFF", then "_ _ _" shows in display and setting cannot
be programmed) This is the average cooking temperature for each
product. The timer speeds up at temperatures above this setting and
slows down at temperatures below this setting. Press the product
button, or the ▲ and ▼ buttons, to change this value.
Press ► button until "FULL HT" shows in the display along with the
15.
full heat value in seconds, which means the heat is on as soon as a
timer button is pressed, for the programmed length of time. Press the
product buttons, or the ▲ and ▲ buttons, to change this value of 0 to
90 seconds.
Press ► button until "PC FACTR" shows in the display along with
16.
the proportional temperature, which helps to keep the oil from over-
shooting the setpoint temperature. Press the product buttons, or the
▲ and ▼ buttons, to change this value of 0 to 50 degrees.
• Use ◄ button to go back to previous menu items.
• Press the ► button when finished with the current product, return to the
"SELECT PRODUCT" step.
• Press and hold button to exit PRODUCT PROGRAM Mode.
61