Henny Penny EVOLUTION ELITE EEG-241 Operator's Manual page 23

3-1.
OPERATING
COMPONENTS
(CONT.)
Item
Fig. Description
No.
3-1 1
3-1 2
3-1 3
Digital Display
3-1 4
3-1 5
3-1 6
3-1 7
3-1 8
3-1 9
3-1 10
March 2014
This LED lights when the control calls for heat for the left/ right vat, and the
burners ignite and heat the oil
During normal operation, press this button to start and stop cook cycles for the
left basket; press to change displayed product; also used for √ to indicate YES
or to confirm
During normal operation, press this button to start and stop cook cycles for the
left basket; press to change displayed product; also used for X to indicate NO
or cancel
Shows the product codes; shows the timer countdown during cook cycles;
shows the prompts during the filter modes; shows the selections in the Program
Mode; shows the temperature of the oil by pressing
(also displays in several languages)
Press once to view actual oil temperature; press twice to view oil set-point
temperature; and press three times to view recovery information for each vat
from 250 F-300 F (121 C-149
o o o
button to back-up to a previous parameter in Program and Filter Modes.
Used to access the Filter Menu; also used for ▲ or ▼ buttons; press once to
view the number of cook cycles before next filter in Global Filter or the mode
or percentage of filter allowance in Mixed Filter; press twice to view the time
and date of the most recent filter on each vat; press three times to view the
number of hours of use of the filter pad presently in the drain pan.
Used to access the Program Modes; used as ► button to advance to the next
parameters in Program and Filter Modes; press to select 2nd languages and
volumes
Press to turn on and off the heat system for the left vat(s); on full vats either
button can be used
Each product button LED lights when that particular product has been
selected, or when it is compatible with cook temperature.
Press to select the desired product; press to place the letters under the button,
during naming a product in Program Mode
The can be used to start an Idle Mode if enabled in Special Program Mode
16
Function
C). Used in Programming Modes; used as ◄
o
; shows error codes