Henny Penny EVOLUTION ELITE EEG-241 Operator's Manual page 55

Reduced oil capacity open fryer
Hide thumbs Also See for EVOLUTION ELITE EEG-241:
Table of Contents

Advertisement

3-19.B
CLEAN-OUT MODE -
SMART TOUCH
(CONT.)
April 2015
Press and hold
until display shows "1.EXPRESS FILTER?".
2.
Press and release ► button several times until display shows
3.
"CLEAN-OUT".
Press √ button; display shows "OIL RMVD" "YES NO".
4.
If oil has already been removed, press √ button and control skips
5.
down to "Solution Added?" step.
If vat still has oil, press X button; display shows "DISPOSE?" "YES
NO". Press √ button to dispose of the oil, or press X button to exit
Clean-Out Mode.
Display shows "IS DISPOSAL UNIT IN PLACE" "YES NO". If
"NO" is selected, display shows "INSERT DISPOSAL UNIT". Once
disposal unit is in place, press √ button for YES; the drain will open
automatically and display shows "DRAINING" and oil drains from
vat. Display shows "VAT EMTY" "YES NO". Press √ button when
ready.
Bulk Oil Systems Only! Display shows "CHK PAN" if the filter drain
pan is missing. Once pan is in place, the drain will open automatically
and display will show "DRAINING" and oil drains from vat.
Display then shows "√=PUMP" "X=DONE. Press √ button, display
shows "DISPOSING" and oil is pumped from drain pan. Once pan is
empty, press X button twice and close drain.
Display shows "SOLUTION ADDED?" "YES NO". Fill vat with hot
6.
water to 1 in. (25 mm) above the top fill line, add 4 ozs. (0.12 liters)
of open fryer cleaner, and mix thoroughly. Press √ button and display
shows "START CLEAN" "YES NO".
Remove the disposal shuttle and empty filter drain pan of internal
7.
filtering components and move components to a sink to be cleaned.
Return empty filter drain pan and cover to fryer, making sure it is
pushed securely into place and the latch fully engaged.
Press √ button, display shows "CLEANING" and a count-down
8.
timer. Heat regulates to 195°F (91°C) for this step for one hour.
Add water as needed during cleaning process to keep solution 1 in.
(25 mm) above the top fill line.
To stop cleaning cycle early, press X button; display shows "QUIT
CLEANING" "YES NO". Press √ button to cancel the rest of
countdown time and proceed to the rinse steps.
48

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents