Switch On The Inverter From Battery; Configuration Of The Iss 1Play Tl M - Ingeteam INGECON SUN STORAGE 1Play TL M Use And Settings

Ingeteam
2.2

Switch on the inverter from battery

The inverter can be supplied from the eBick Ultra 175 battery, without previous configuration.
Also, it's possible to switch on the inverter from the PV field.
Then the inverter must be configurated.
2.3

Configuration of the ISS 1Play TL M

The inverter can be configured to work with eBick Ultra 175 though two different ways: wizard or
advanced settings. If the configuration is done during the commissioning, the configuration will
be done through the wizard.
For more details of how to access the inverter web interface, check the Installation and
Operation Manual of the INGECON SUN STORAGE 1PLAY TL M.
Configuration through the Wizard:
This option is the one during the commissioning. Choose the type of battery: CEGASA eBick
Ultra 175.
Configure through the Advanced Settings:
Access to the web interface of the inverter. To perform any configuration change, the installer
access level is needed. When the access level is obtained, go to:
CONFIGURATION > ADVANCED SETTIGNS > TYPE OF BATTERY > CEGASA eBick Ultra
Confirm the desired selection by pressing the "Write" button. A message to confirm the
modification will appear.
ABH2010IMC25_
Use and settings of the INGECON SUN STORAGE 1Play TL M working with eBick Ultra
175 of CEGASA
Please be careful to choose the right battery type when you set up the
configuration in your inverter. The battery or inverter manufacturers have
no responsibility on the damages caused due to incorrect configurations.
For instance, if you select "Lead-acid" as a battery type in the inverter
configuration and the battery being used is "Lithium-ion", the battery might
get damaged or experience performance degradation.
175
14