G64: Cutting Mode - Mitsubishi Electric MELSEC iQ-R16MTCPU Programming Manual

G64: Cutting mode

Executes the next block without deceleration stops between cutting feed blocks.
Code
G64
Processing details
• The G64 command is the opposite of the exact stop check mode (G61). The G64 command continuously executes blocks
without performing a deceleration check between cutting feed blocks. The interpolation command codes that can be used
with the G64 command are G01, G02, and G03 only.
• Cutting mode is in effect when the power supply of the Multiple CPU system is turned ON.
• The G64 command is modal. It remains in effect until any of exact stop check mode (G61), high-accuracy control mode
(G61.1), and automatic corner override (G62) from the same group are commanded.
■In cutting mode
G64 G01 X100. F500.
X200.
V
X-axis
■Not in cutting mode
G61 G01 X100. F500.
X200.
V
X-axis
Program example
■Program that performs positioning by cutting mode
Operation Program
(1) G64 G01 X100. F500.
(2) X200.
(3) X300.
V
X-axis (1)
5 G-CODE CONTROL PROGRAMS
150
5.6 G-Code
Format
G64
(2) (3)
t
t
Remarks
Positioning by cutting mode
Positioning by cutting mode
Positioning by cutting mode
t